The E-flite® Blade® CP Pro 2 has just taken the RTF 3D micro electric helicopter to the next level.  It's the industry’s only fully 3D-capable RTF micro heli that performs aerobatics like backward hurricanes and piro flips right out of the box.  Loaded with incredible features and an unmatched level of out-of-the-box 3D performance, the Blade CP Pro 2 is a 3D machine to reckon with.    

The high-power 370 main motor offers brushless-like performance, while the direct-drive N60 tail motor and G110 heading lock gyro offer incredibly locked-in tail control. The included E-flite HP6DSM 6-channel transmitter features full range Spektrum™ 2.4GHz DSM2™ technology, that, along with the factory-installed Spektrum AR6100 receiver, provides the locked-in, interference-free performance DSM® is known for. A 2-in-1 control unit offers complete control of the main and tail motors, while three DS75 digtal sub-micro servos deliver precise CCPM control of the Bell-Hiller mixing equipped rotor head. 

From its feature-packed design to the level of quality and performance, intermediate to advanced pilots will enjoy testing their aerobatic skills on the Blade CP Pro 2.  Never before has so much 3D aerobatic capability been available in an RTF micro CP class helicopter—right out of the box, no additional parts or upgrades required.

The Blade® CP+ is the perfect “next step” for anyone who’s mastered the basics of heli flight with a coaxial heli like the Blade CX (EFLH1200) or Blade CX2 (EFLH1250), and is ready for a model capable of more advanced maneuvers. It’s also an excellent choice for experienced pilots looking for the best in ready-to-fly micro helicopter performance and value.

The Blade CP+ includes all the impressive features of the original Blade CP, like CCPM and collective pitch, plus a number of new features and accessories that further enhance its flight performance for low-time and experienced pilots alike. The included, optional-use training gear set adds stability while also providing support and cushioning to prevent tip-overs and rotor blade strikes for newer pilots. The 3S 11.1V 800mAh Li-Po battery pack offers a significant boost in power and duration over the Ni-MH batteries found in other similar class models, and the included, optional-use symmetrical main rotor blades allow you to perform advanced aerobatics like loops, rolls and inverted flight without the need for a single hop-up. The separate receiver and advanced 3-in-1 control unit are plug-and-play compatible with brushless power systems and heading lock gyros so you can further enhance the capabilities of your Blade CP+ when you’re ready to take performance to the next level.

The Blade CP+ is versatile enough to fly anywhere, and everything needed to fly is included and installed, such as the 3S 11.1V 800mAh Li-Po battery pack and balancing charger, 370 main and N30 tail motor, 3-in-1 mixer, ESCs and gyro, three S75 sub-micro servos and a 6-channel FM radio system with servo reversing and CCPM mixing. Plus, each Blade CP+ is test-flown at the factory to ensure precise performance and control which makes it truly ready to fly right from the box.

Nothing can touch the cutting-edge performance and value of the Bla ....read more

Weighing in at under one ounce, the nimble Blade® mSR RTF takes ultra-micro helicopter performance to the next level. It comes from the factory completely assembled and flight tested with everything you need to get flying. At the heart of the Blade mSR’s design is a Bell-Hiller rotor head that provides the kind of speed and agility you would expect of a single-rotor heli but maintains a measure of positive stability similar to a co-axial heli. This blend of agility and stability makes it the ideal “next step” for someone moving up from a coaxial heli, such as the Blade CX3 or Blade mCX.

For single-rotor ultra-micro heli excitement you can fly almost anywhere, the Blade mSR simply can’t be beat.

Blade’s mCX Tandem Rescue is a fun new twist on the wildly popular Blade mCX platform. It comes out of the box ready for flight with Spektrum 2.4GHz DSM control, a realistic looking rescue heli body and working navigation lights.  Everything you need for indoor aerial adventures like night time family room patrols or survivor extractions from the top of the fridge.

The Blade® mCX is an ultra micro-sized version of the Blade CX/CX2 that offers first-time and experienced helicopter pilots unsurpassed stability and incredible control through the coaxial, counter-rotating head design and Spektrum™ 2.4GHz DSM2™ control. Its single-cell Li-Po battery charges in approximately 30 minutes and delivers flight times of 6–8 minutes, while full, 4-channel control provides the precision needed for flying in those tight spaces indoors. All you need to do is bind your DSM2 transmitter or module to the Blade mCX's receiver and your adventure into the new era of RC flight begins. With its cutting-edge engineering, design, technology and performance, the Blade mCX Bind-N-Fly™ is sure to provide you with hours of helicopter flying fun.

The unique 5-in-1 control unit with Spektrum 2.4GHz DSM2 compatible receiver, main motor ESCs, mixer, gyro and fully proportional servos will bind to your DSM2 transmitter to give you the most advanced mCX flight experience. You can take full advantage of utilizing dual rates, mixing and other capabilties of your transmitter.  You can experience heading-lock-like performance and fully proportional control all in this one-ounce package, just bind and fly. 

Compatible with the following DSM2 transmitters:

• E-flite® LP5DSM (included with Blade CX2)

• ParkZone® Vapor™ transmitter

• JR® 12X

• JR X9303

• Spektrum™ DX5e

• Spektrum DX6i

• Spektrum DX7

• Spektrum Modules

The Blade® 400 3D is designed to give intermediate to advanced heli pilots a ready-to-fly experience like no other. It comes 100% factory built and flight tested so you can get flying right away. There is nothing left to assemble or set up. The Blade 400 3D is ready for hovering and 3D aerobatics as soon as you finish charging the battery. And you can fly it just about anywhere, anytime thanks to the included Spektrum™ 2.4GHz DX6i radio system that avoids interference with other RC users, even those on other 2.4GHz systems. You also get the benefit of the DX6i’s advanced DSM2™ protocol that provides the kind of locked-in, solid response that will let you fly even the most demanding 3D maneuvers with absolute precision.

The Blade 400 3D is the first ready-to-fly mini-heli to come equipped with Spektrum’s advanced DX6i 2.4GHz DSM2 6-channel programmable computer aircraft system. Besides providing freedom from frequency restrictions and interference, the DX6i’s DSM2 technology offers other unique advantages like faster control response and innovative features such as ServoSync™. ServoSync automatically resequences transmitted data so mixed servos receive their pulses at the same time so you can fly extreme 3D aerobatics with absolute precision. The system also includes the feather-light, 4.4-gram Spektrum AR6100e Microlite Receiver.

Other DX6i features include:
• Full-range capability
• 10-model memory
• Heli and airplane programming
• Two types of swashplate mixing: standard or 120º CCPM
• 3-axis dual rates and exponential
• Travel adjust
• Servo monitor
• Two 5-point throttle curves
• Three 5-point pitch curves
• Revo mixing
• Gyro sensitivity programming
• Two programmable mixes

The DX6i is not only perfectly suited for the Blade 400—it can al ....read more

The Blade CP Pro 2 PNP is a micro electric helicopter able to perform a variety of 3D aerobatics such as inverted flight, backward hurricanes, piro flips and more right out of the box—just add your own transmitter, receiver and battery. It’s designed to give intermediate to advanced heli pilots an experience like no other. Its feature-packed design offers a level of quality and performance beyond that of all similar class models. This allows intermediate pilots to perfect their skills quickly and experienced pilots to enjoy maximum performance with no extra effort.

The factory-installed high-power 370 main motor offers brushless-like performance, while the direct-drive N60 tail motor and G110 heading lock gyro offer incredibly locked-in tail control. A 2-in-1 control unit offers complete control of the main and tail motors, while three DS75 digital sub-micro servos deliver precise CCPM control of the Bell-Hiller mixing equipped rotor head.

From its feature-packed design to the level of quality and performance, intermediate to advanced pilots will will enjoy testing their aerobatic skills on the Blade CP Pro 2 PNP.

The flight experts have done it again. The Blade® CX3 MD 520N® Bind-N-Fly gives pilots unbelievable micro-heli excitement. The CX3 is perfect for the pilot that already owns a Spektrum DSM2 transmitter (including the LP5DSM transmitter included with the Blade CX2). It’s also covered in the licensed MD 520N scale body with an attractive police trim scheme.

 Just like its predecessor, the Blade CX3 offers first-time heli pilots exceptional stability and incredible control through the coaxial, counter-rotating head design and 3-in-1 control unit. In addition, this CX3 also features two feather-light S60 Super Sub-Micro servos that provide full cyclic movement of forward, backwards and side-to-side maneuverability. The Blade CX3 also includes a heading lock gyro to provide better control and locked-in performance. The heading lock gyro also makes learning to fly much easier for beginners. It also makes more advanced maneuvers easier due to constant pirouette rate with stick position. As with other co-axial Blade helicopters, no flying experience is required to begin your heli flight experience with the Blade CX3. This indoor helicopter is 100% factory-assembled, test flown and with the exception of a DSM2 transmitter, is ready to fly out of the box.

MD 520N® is a registered trademark or trademarks of MD Helicopters Inc. and is used under license to Horizon Hobby, Inc.

Weighing in at under one ounce, the nimble Blade® mSR Bind-N-Fly takes ultra-micro helicopter performance to the next level and it comes from the factory completely  assembled and flight tested. Its unique Bell-Hiller rotor head design provides the kind of speed and agility you would expect of a single-rotor heli but maintains a measure of positive stability similar to a co-axial heli. This blend of agility and stability makes it the ideal “next step” for someone moving up from a coaxial heli, such as the Blade CX3 or Blade mCX.

For single-rotor ultra-micro heli excitement you can fly almost anywhere, the Blade mSR simply can’t be beat.