Dynam Lipo Charger
Dynam Lipo Charger
Distributed temperature sensing
Measuring principle Raman effect
Physical measurement dimensions, such as temperature or pressure and tensile forces, can affect glass fibres and locally change the characteristics of light transmission in the fibre. As a result of the damping of the light in the quartz glass fibres through scattering, the location of an external physical effect can be determined so that the optical fibre can be employed as a linear sensor. Optical fibres are made from doped quartz glass. Quartz glass is a form of silicon dioxide (SiO2) with amorphous solid structure. Thermal effects induce lattice oscillations within the solid. When light falls onto these thermally excited molecular oscillations, an interaction occurs between the light particles (photons) and the electrons of the molecule. Light scattering, also known as Raman scattering, occurs in the optical fibre. Unlike incident light, this scattered light undergoes a spectral shift by an amount equivalent to the resonance frequency of the lattice oscillation. The light scattered back from the fibre optic therefore contains three different spectral shares:
the Rayleigh scattering with the wavelength of the laser source used,
the Stokes line components from photons shifted to longer wavelength (lower frequency), and
the anti-Stokes line components with photons shifted to shorter wavelength (higher frequency) than the Rayleigh scattering.
The intensity of the so-called anti-Stokes band is temperature-dependent, while the so-called Stokes band is practically independent of temperature. The local temperature of the optical fibre is derived from the ratio of the anti-Stokes and Stokes light intensities.
Measuring principle OTDR vs OFDR technology
There are 2 principles of measurement for distributed sensing technology. OTDR (Optical Time Domain Reflectometry) & OFDR (Optical Frequency Domain Reflectometry).
OTDR was developed more than 20 years ago and has become the industry standard for telecom loss measurements which detects the – compared to Raman signal very dominant – Rayleigh backscattering signals. The principle for OTDR is quite simple and is very similar to the time of flight measurement used for radar. Essentially a narrow laser pulse generated either by semiconductor or solid state lasers is sent into the fibre and the backscattered light is analysed. From the time it takes the backscattered light to return to the detection unit it is possible to locate the location of the temperature event.
Alternative DTS evaluation units deploy the method of Optical Frequency Domain Reflectometry (OFDR). The OFDR system provides information on the local characteristic only when the backscatter signal detected during the entire measurement time is measured as a function of frequency in a complex fashion, and then subjected to Fourier transformation. The essential principles of OFDR technology are the quasi continuous wave mode employed by the laser and the narrow-band detection of the optical back scatter signal. This is offset by the technically difficult measurement of the Raman scatter light and rather complex signal processing, due to the FFT calculation with higher linearity requirements for the electronic components.
Using the Raman OTDR/OFDR DTS technique it is possible to analyse distances of greater than 30 km from one system and to measure temperature resolutions of less than 0.01C.
Construction of Sensing Cable & System Integration
The temperature measuring system consists of a controller ( laser source, optical module, HF mixer, receiver and micro-processor unit) and a quartz glass fibre as line-shaped temperature sensor. The fibre optic cable (can be 30km+ in length) is passive in nature and has no individual sensing points and therefore can be manufactured based on standard telecoms fibres. This offers excellent economies of scale. Because the system designer/integrator does not have to worry about the precise location of each sensing point the cost for designing and installing a sensing system based on distributed fibre optic sensors is greatly reduced from that of traditional sensors. Additionally, because the sensing cable has no moving parts and design lives of 30 years +, the maintenance and operation costs are also considerably less than for conventional sensors. Additional benefits of fibre optic sensing technology are that it is immune to electromagnetic interference, vibration and is safe for use in hazardous zones (the laser power falls below the levels that can cause ignition), thus making these sensors ideal for use in industrial sensing applications.
With regards to the construction of the sensing cable, although it is based on standard fibre optics, care must be taken in the design of the individual sensing cable to ensure that adequate protection is provided for the fibre. This must take into account operating temperature (standard cables operate to 85C but it is possible to measure up to 700C with the correct design), gaseous environment (hydrogen can cause deterioration of the measurement though “hydrogen darkening” – aka attenuation – of the silica glass compounds) and mechanical protection.
Most of the available DTS systems have flexible system architectures and are relatively simple to integrate into industrial control systems such as SCADA
Laser Safety and Operation of System
When operating a system based on optical measurements such as the DTS technology, it is important to make sure that adequate precautions are taken with regards to laser safety. It is important to ensure that for systems that are used for permanent installations that a laser safety class 1M product is achieved. Certain systems are based on higher power lasers of a 3B rating, which although safe for use by approved laser safety officers, are not suitable for permanent installations.
Applications
Distributed Temperature Sensing can be deployed successfully in multiple industrial segments:
Oil & Gas Exploration permanent Downhole Monitoring
Power Cable and Transmission Line Monitoring (Ampacity Optimisation)
Fire Detection in Tunnels and Special Hazard Buildings
Industrial Induction Furnaces Surveillance
Integrity of LNG Carriers and Terminals
Leakage Detection at Dikes and Dams
Temperature Monitoring in Plant & Process Engineering, including Transmission Pipelines
Storage Tanks and Vessels
More recently, DTS has been applied for ecological monitoring as well:
Stream temperature
Groundwater source detection
Temperature profiles in a mine shaft and over lakes and glaciers
Deep Rainforest ambient temperature at various foliage densities
Temperature profiles in an underground mine, Australia.
See also
Fiber Bragg grating
Time-domain reflectometer
Well logging
WITSML
External links
The Fiber Optic Association
Technical Talks on Principal of Technology
Fiber-Optic Distributed Temperature Sensing Technology Demonstration and Evaluation Project
SEAFOM, a nonprofit organization promoting the standards and growth in use of fiber optic-based sensing in subsea applications
DTS in fire detection
Paper published at International Conference on Automatic Fire Detection (AUBE04); University of Duisburg;
European Initiative SOLIT – Safety Of Life In Tunnels
DTS in power cable monitoring
Case study: Permanent Temperature Monitoring of a 220kV XLPE cable at the Olympic City 2008, Beijing
DTS in ecological monitoring
Selker, J.S., N. van de Giesen, M. Westhoff, W. Luxemburg, and M. Parlange. Fiber Optics Opens Window on Stream Dynamics. Geophysical Research Letters, DOI:10.1029/2006GLO27979, 2006
Selker, J.S., L. Thvenaz, H. Huwald, A. Mallet, W. Luxemburg, N. van de Giesen, M. Stejskal, J. Zeman, and M. Westhoff, and M.B. Parlange.Distributed Fiber Optic Temperature Sensing for Hydrologic Systems. Water Resources Research, 42, W12202, doi:10.1029/2006WR005326, 2006
Nick Tufillaro, John Dorighi, Mike Collier and John Selker, Measuring stream dyamics with fiber optics, Agilent Measurement Journal, 3, 2007
DTS in pipeline leak detection
Gas Pipeline Leak Detection Test Case Study (pdf)
DTS in sewer monitoring
O.A.C. Hoes, R.P.S. Schilperoort, W.M.J. Luxemburg, F.H.L.R. Clemens and N.C. van de Giesen. Locating illicit connections in storm water sewers using fiber-optic distributed temperature sensing. Water Research, Volume 43, Issue 20, December 2009, Pages 5187-5197, DOI:10.1016/j.watres.2009.08.020
Categories: Sensors | Fiber optics | Measuring instruments | Fire detection and alarm | Petroleum production | Electrical engineering | Power cables | Electricity distribution
About the Author
I am a professional writer from China Toys Suppliers, which contains a great deal of information about dewalt battery charger , lipo battery charger, welcome to visit!
RC Hawk Sky my 1st FPV filmed flight
|
|
Dynam Supermate DC6 DC Multi Function Balance Charger/Discharger 1-6 cell Lilo/LiPo/LiFe, 1 to 15 cells NiCd NiMH … |
|
|
Dynam I can Fly 4 Channel Brushless/ESC /Lipo Electric Airplane $205.00 Dynam ICanFly The new Dynam ICanFly is ready to fly (RTF) with all electronics pre-installed. Just what its name says, “I Can Fly”, users of all levels can fly this plane, even in windy conditions. Made for crash resistance and 3D aerobatic flight, this plane will impress. |
Radio Controlled Helicopters Video Gas
Radio Controlled Helicopters Video Gas
Gas RC Helicopter
|
|
Syma S107/S107G R/C Helicopter – Red $20.99 Syma S107G is equipped with a 4-in-1 infra-red receiver (Gyro, ESC, Mixer, Receiver). This palm size S107 Toy Helicopter (18.5cm long) comes with Aluminum Frame and a Great detail canopy, it doesn’t look like a toy, but a very serious Helicopter. It is able to move in 3 Direction base on the 3 Channels, anyone can hover it easily. Since it is made with Aluminum Frame, very light weight and almost … |
|
|
Cobra Double Horse 9053 26 Inches 3.5 Channel Outdoor Metal Gyro RC Helicopter —NEW! 9053 $43.45 The newest model with the latest Gyroscope technology. The regular 3 channels allow you to fly : up, down, turn left, turn right, move forward, backward. This new 3.5 channels does all that, plus it let you control the speed, you can either fly in low or high speed by simply switch the speed control button. There are not many flying around, be the first to own 1 of this beautiful helicopter. This… |
|
|
Syma New S022 Big CH-47 Chinook 3 Channels RC Helicopter $39.95 The Famous Syma New S022 Big 3CH RC Chinook. Factory pre-assembled, Ready To Fly! Simply remove it from the box, charge and insert the batteries, and get ready to take-off. The package is equipped with everything needed to get airborne (except 6AA batteries for the transmitter). Once again, just simply take it out of the box, set the batteries, and you have lift-off anywhere you want! Now everyo… |
|
|
The 27 Most Important Tips A Remote Control Helicopter Fan Must Know About – ASAP $2.99 ***************************************************************************************************************“ATTENTION: This ebook is only priced at $2.99 for a short time, I will be increasing the price to $3.99 soon.”***************************************************************************************************************These are the 27 most important tips that a Remote Control Heli… |
Dynamic Disk To Basic
Dynamic Disk To Basic
Converting Dynamic Disk to Basic Disk Cause Partition Loss in Windows Vista
Microsoft Windows Vista is the latest version of Windows operating system. It includes a number of added and advanced features and one such feature is support to Dynamic Disk volumes. Vista supports the Dynamic Disk volumes for its Ultimate, Enterprise and Business editions. You can easily convert a basic disk to dynamic disk using ‘Convert to Dynamic Disk’ option from the Disk Management.
However, when you convert a dynamic disk back to basic disk, it is not usual and requires hard drive formatting. Formatting removes all of your hard drive partitions and cause critical partition loss situations. In order to overcome this issue, you are required to opt for Partition Recovery solutions. According to Microsoft Windows users, in some situations after converting the Windows Vista installed drive partition from basic to dynamic, the following problems are observed:
- The dynamic Disk volumes could not be deleted when you try to reinstall Microsoft Windows Vista. Delete command, which appears in “Where you want to Install Windows” dialog box if you reinstall Windows, isn’t available.
- If you convert the dynamic disk to basic disk, all of the hard drive volumes are needed to be removed first and the dynamic volumes are converted to the basic volumes using Convert to Basic Disk command by Disk Management.
For sorting out such issues and perform Partition Recovery, you need to create backup and format entire volume. Use diskpart.exe command to remove the dynamic volume and repartition the hard drive. In case if you do not have backup of your dynamic disk and you format the drive, in order to convert it to dynamic disk, the drive partitions and stored data may get lost. In such cases, you can not access your valuable data and thus it might harm your business.
At this point, it becomes extremely significant to recover lost partitions and stored data to save your business. This is best possible using powerful third party tools, known as Partition Recovery Software. These software are specifically designed to systematically scan damaged hard drive using most advanced scanning methods and retrieve all of the lost partitions and stored data from it. These applications might vary for you versions of Windows operating system. You should go for a Partition Recovery Software that supports recovery from Windows Vista.
Stellar Phoenix Windows Data Recovery is the most comprehensive and effective tool to recover FAT32, VFAT, NTFS and NTFS5 file system partitions. This software is designed for Microsoft Windows 7 RC1, Vista, 2003, XP and 2000. It provides Boot DVD to recover data from unbootable Windows computer.
About the Author
Author is doing research on partition recovery related problems and discussed on the causes of Partition Corruption and File loss .Author suggested to use partition recovery software in case of partition loss or file corruption.
How To Convert a Basic to Dynamic Disk Quick & Simple
Esky Simulator Download
Esky Simulator Download
E-Sky FMS (Simulator)
|
|
E-Sky 4CH USB Flight Simulator Training Kit For RC Airplanes and R/C Helicopters $21.50 E-Sky 4CH USB Flight Simulator Training Kit For RC Airplanes and R/C Helicopters You can operate an aircraft with the same feeling of a pilot in the computer, experiencing the exciting flight of a real plane, and your of dream flying freely in the blue sky deriving from your childhood come true! Come on! Challenge to be a pilot and enjoy the exciting! This simulator includes a model airplane sim… |
|
|
GWS FMS Flight Simulator Kit GWFSM003 Handheld USB Controller works with Windows PC & FMS Software $44.89 GWS FMS Flight Simulator (GWFSM003). Connect this handheld controller to the USB port of your Windows 95/98/ME/2000/XP PC. In addition to the USB controller manufactured by GWS, we include FMS flight simulator software and instructions. This enables you to fly virtual rc models for all your favorite radio controlled airplanes and helicopters – including our very own Draganflyers (also available as… |
|
|
ESKY 4CH USB RC Airplane, Helicopter Flight Simulator $26.98 This is a revolutionary new Model Flight Simulator that allows the user to fly with the same type of transmitter used for regular flight. There are only a few Transmitter and Simulator combos on the Internet and none are equivalent to the ESKY FMS Simulator Package in value. Specification: System Requirement: Windows XP, 2000, ME, 98 |
Dynamic Character Example
Dynamic Character Example
Great Plains Data Import: Dynamics Gp Integration
Microsoft Dynamics GP or former Great Plains has several methods in importing data. In this small publication we would like to give you initial highlights and after getting this help you should be able to find additional info in GP user manuals, Customer Source Knowledge database or request it through your Dynamics GP Partner or reseller
1. Dynamics GP Integration Manager. This tool is user friendly and allows you to import majority of GP master objects: accounts, customers, vendors, employees, addresses; work transactions: sales invoice, purchase order, payroll transaction to give you the idea. In IM you should come through several steps to design integration: setup source or sources (if more than one – you should link them into one set following SQL rules), select destination (like SOP Entry – target object) and then tune destination mapping. If you are programmer, you would also like to review IM VBA scripting chapters in IM manual. IM accepts tab, csv as well as custom character delimited text files plus via ODBC and Advanced ODBC you can import or integrate everything that is ODBC compliant: Microsoft SQL Server, mySQL, Oracle, DB2, SyBase, Lotus Notes Domino, Microsoft Access, Microsoft Excel, FoxPro and so on and so on. ODBC integration should work in most of the EDI (Electronic Document Interchange) scenarios, where you pull data into Dynamics GP
2. eConnect. For those of you who are looking into more technically challenging projects: real time, ecommerce, scheduled integration, and if you are comfortable with Microsoft Visual Studio C# or VB .Net programming with XML and SQL elements, please consider eConnect. This SDK was initially designed for ecommerce web programmers to integrate ecommerce website with Dynamics GP back office
3. SQL insert statements. If you are SQL DBA or very experienced programmer, we understand the desire to push records directly to Dynamics GP SQL tables. However, you will face the challenge of meeting very complex business logic and its reflection in data flow. Plus all this work was already completed by eConnect developers, where end technology is SQL Server encrypted stored procedures. So, this approach of direct SQL scripting might only be recommended if your GP import task is absolutely simple (when you have to populate one table only, for example)
4. SQL DTS packages. Here you could consider complex scenarios, when you are exporting data from cross-platform database, calling eConnect based application to move data to GP and then mark the data as imported in your source DB. Call your Dynamics GP technical consultant for further details
About the Author
Andrew Karasev, Alba Spectrum LLC, help@albaspectrum.com 1-866-528-0577, http://www.albaspectrum.com. Serving ERP and MRP community since 1994, local service in Chicago, Houston, San Diego, Atlanta. Information portal: http://www.pegasplanet.com We serve you USA and Canada nationwide from our Dynamics GP call center: California, Illinois, New York, Florida, Minnesota, New Jersey, North and South Carolina, Georgia, Louisiana, Texas, Ontario, Quebec, Washington, Missouri, Iowa, Nebraska, Kansas, Colorado, Nevada, New Mexico, Utah, Arizona, Montana, Oregon, New York, New England. International clients welcome from Australia, New Zealand, Oceania, South Africa, UK, Brazil, Caribbean, Central America
|
|
Race 07: Official WTCC Game $29.98 Real cars, real racing. That’s what it’s all about in RACE 07. Enjoy 9 different racing classes, each with its own distinctive character. From the prestigious World Touring Car Championship to the insane speed of the F3000 class. These are just a few of the many cars and classes featured in this ultimate racing sensation. Hit the road on one of the 32 real-life racing circuits or city tracks and s… |
|
|
PROPELLERHEAD Reason Drum Kits 2 ReFill ( Windows/Macintosh ) $98.40 Reason Drum Kits 2 ReFill is an extensive library of lifelike, multi-sample drum kits for your personal use. Every aspect of a drum recording session is available to you here: The drums themselves, the room surrounding them, the drummer, mics, outboard and more. You can use the Producer Kits to emulate famous signature drum sounds — load and swap an entire session with a single click. It also has… |
|
|
The Art Of Dramatic Writing: Its Basis in the Creative Interpretation of Human Motives $3.99 … |
|
|
Dynamic Characters $3.48 Dynamic CharactersA truly unforgettable story is defined by its characters. Their motivations, their changes, their actions compel us to read on, anxiously trying to discern what will happen next.In Dynamic Characters, award-winning author and Writer’s Digest columnist Nancy Kress explores the fundamental relationship between characterization and plot, illustrating how vibrant, well-constructed ch… |
Exceed Falcon 40 Manual
Exceed Falcon 40 Manual
Exceed Rc falcon 40
|
|
Exceed RC 2.4Ghz Falcon 40 V2 4-Channel RC Helicopter RTF Fixed Pitch – 100% Ready-to-Fly w/ Lipo Battery & LCD Transmitter Monitor This is the newly built and redesign Falcon 40, ready to fly, 2.4Ghz Falcon 40 Helicopter from Exceed RC. Never before have electronics of this quality been utilized in an popular RC Beginner Helicopter. Thanks to sophisticated components and advanced engineering, the 2.4Ghz Falcon 40 are not only ready to fly, they fly remarkably easy as well. The high-efficiency tail rotor motor offers perfect f… |
